|
In
addition to the requirements shown under
the general listing procedures, the following
information is required in a request for
initial acceptance of terminating cables.
Item
1: Test data indicating that the copper
conductor joints comply with the finished
conductor end product performance requirements
of 7 CFR1755.870 (RUS Bulletin 1753F-207),
RUS Specification for Terminating Cables,
for each conductor gauge size.
Item
2: Test data indicating that the finished
conductor insulation and finished jacketing
material complies with the physical end
product performance requirements of 7
CFR 1755.870 (RUS Bulletin 1753F-207),
RUS Specification for Terminating Cables.
Item
3: Test data indicating that shield joints
comply with the finished shielding end
product performance requirements of 7
CFR 1755.870 (RUS Bulletin 1753F-207),
RUS Specification for Terminating Cables.
Item
4: Test data indicating compliance with
the electrical end product performance
requirements of 7 CFR 1755.870 (RUS Bulletin
1753F-207), RUS Specification for Terminating
Cables, for each conductor gauge size.
Item
5: Test data indicating compliance with
the mechanical end product performance
requirements of 7 CFR 1755.870 (RUS Bulletin
1753F-207), RUS Specification for Terminating
Cables.
Item
6: Test data indicating compliance with
the qualification testing (Appendix A)
section of 7 CFR 1755.870 (RUS Bulletin
1753F-207),RUS Specification for Terminating
Cables.
Item
7: A list of all materials used to manufacture
terminating cables to 7 CFR 1755.870 (RUS
Bulletin 1753F-207), RUS Specification
for Terminating Cables. The list should
include the manufacturer of the material,
its product designation, and its product
data sheet for each material.
Item
8: A 3-foot sample of cable manufactured
to 7 CFR 1755.870 (RUS Bulletin 1753F-207),
RUS Specification for Terminating Cables.
Item
9: Submit only 1 original and 1 photocopy
of the required test data.
A
copy of RUS Bulletin 1753F-207, which
is the user-friendly version of this regulation,
can be found at http://www.usda.gov/rus/telecom/publications/bulletin.htm
For
further information or clarification on
the above acceptance procedures, please
contact:
Norberto
Esteves
norberto.esteves@usda.gov
|
