In addition
to the requirements shown under the general listing procedures ( http://www.usda.gov/rus/telecom/listing_procedures/general_lop.htm
), the following information is required in a request for acceptance
of Enclosures, ready-access, cable:
-
Item 1:
Two copies of test data demonstrating compliance with Telcordia's
Issue 1 of GR-902-CORE, Generic Requirements for Handholes and Other
Below-Ground, Non-Concrete Splice Vaults( http://telecom-info.telcordia.com/site-cgi/ido/index.html
), ANSI/SCTE 77 2002 standard, Specification for Underground Enclosure
Integrity, or any other nationally recognized industry standard covering
telecommunications handholes
-
Item 2:
Product identification information
-
Item 3:
Catalog designations for each handhole size and type
-
Item 4:
Catalog information describing the product
-
Item 5:
Quality assurance data which is representative of several lots of
production and which demonstrates the reliability of an ongoing quality
control program. If available, provide a copy of the Quality Control
Manual currently in use.
For any further
information on the acceptance procedures for handholes please please
email:
Tanya
Walker
(202) 720-3529
tanya.walker@usda.gov
or
Norberto Esteves
norberto.esteves@usda.gov
|
