|
In
addition to the requirements shown under
the general listing procedures, the following
information is required in a request for
initial acceptance of shield bonding connectors.
Item
1: Information specifying the copper cable,
copper wire,and/or fiber optic cable diameters
that can be used with shield bondingconnectors
manufactured in accordance with REA Bulletin
345-65, "REA Specificationfor Shield
Bonding Connectors," PE-33.
Item
2: A certification that the shield bonding
connectors comply with the mechanical
requirements of REA Bulletin 345-65, "REA
Specification for Shield Bonding Connectors,"
PE-33.
Item
3: Test data indicating that the shield
bonding connectors comply with initial
connection resistance end product performance
requirements of REA Bulletin 345-65, "REA
Specification for Shield Bonding Connectors,"
PE-33.
Item
4: Test data indicating that the shield
bonding connectors comply with the environmental
end product performance requirements of
REA Bulletin 345-65, "REA Specification
for Shield Bonding Connectors," PE-33.
Item
5: Test data indicating that the shield
bonding connectors comply with the endurance
end product performance requirements of
REA Bulletin 345-65, "REA Specification
for Shield Bonding Connectors," PE-33.
Item
6: Test data indicating that the shield
bonding connectors comply with current
surge end product performance requirements
of REA Bulletin 345-65, "REA Specification
for Shield Bonding Connectors," PE-33.
Item
7: Test data indicating that the shield
bonding connectors comply with the salt
fog end product performance requirements
of REA Bulletin 345-65, "REA Specification
for Shield Bonding Connectors," PE-33.
Item
8: A list of materials, plating types,
and plating thicknesses used to fabricate
the connectors to REA Bulletin 345-65,
"REA Specification for Shield Bonding
Connectors," PE-33.
Item
9: Identification of the method of shipment
of the shieldbonding connectors.
Item 10: A sample of each shield bonding
connector size fabricatedto REA Bulletin
345-65, "REA Specification for Shield
Bonding Connectors,"PE-33.
Item
11: Submit only 1 original and 1 photocopy
of the required test data for the specification.
For
further information or clarification on
the above acceptance procedures, please
contact:
Norberto
Esteves
norberto.esteves@usda.gov
|
