|
Item
sh
In
addition to the requirements shown under
the general listing procedures, the following
information is required in a request for
initial acceptance of Terminal Blocks
for use in pedestals.
sh-a
Unprotected or Protected Filled IDC Terminal
Blocks
Item
1: Test data demonstrating compliance
with appropriate Telcordia industry requirements
and standards:
TR-NWT-001195
- Generic Requirements For Insulation
Displacement Connector (IDC) Cross-Connect
Terminal Blocks
TR-NWT-001305 - Generic Requirements for
Surge Protected Terminal Blocks
http://telecom-info.telcordia.com/site-cgi/ido/index.html
Item
2: Product identification information
including catalog designations for each
size and types as well as catalog information
describing the product.
Item
3: Quality assurance data which is representative
of several lots of production and which
demonstrates the reliability of an ongoing
quality control program. If available,
provide a copy of the Quality Control
Manual currently in use.
Item
4: A sample of each product for acceptance.
Item
5: Submit only 1 original and 6 photocopies
of the required test data.
sh-b
Unprotected or Protected Filled Binding
Post Terminal Blocks
Item
1: Test data demonstrating compliance
with Telcordia industry requirements and
standards:
TR-NWT-000975
- Generic Requirements For Unprotected
Terminal Blocks
TR-NWT-001305 - Generic Requirements for
Surge Protected Terminal Blocks
http://telecom-info.telcordia.com/site-cgi/ido/index.html
Item
2: Product identification information
including catalog designations for each
size and types as well as catalog information
describing the product.
Item
3: Quality assurance data which is representative
of several lots of production and which
demonstrates the reliability of an ongoing
quality control program. If available,
provide a copy of the Quality Control
Manual currently in use.
Item 4: A sample of each product for acceptance.
Item 5: Submit only 1 original and 6 photocopies
of the required test data.
For
further information or clarification on
the above acceptance procedures, please
contact:
Norberto
Esteves
norberto.esteves@usda.gov
|
